Occasionally, you may require to reset your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the adjustments or are experiencing unexpected issues. Fortunately, resetting your Holosun is a simple process that can be performed in just a few actions.
- First ensuring your red dot sight is activated.
- Identify the small reinitialize button on the side of the unit.
- Use a paperclip to activate the reset switch for approximately 7 milliseconds.
- Release the reset button and your Holosun EPS Carry Red Dot sight will reboot.
- The red dot sight should now be set back to its factory settings.
Return to Your Holosun EPS Carry Red Dot back to Defaults
In case you've tweaked your Holosun EPS Carry red dot settings and want to go back to basics, resetting it to its factory configuration is a breeze. First, locate the tiny button on the bottom of your optic. Then, keep pressed it for around five seconds until you see the indicator light change. Your Holosun EPS Carry is now reverted to its factory settings, ready for accurate shooting.
revive your Holosun EPS Carry Back to Action
Is your beloved Holosun EPS Carry experiencing some performance problems? Don't despair! A simple factory reset can often solve the problem and get your red dot sight back to its former glory. Before you begin, remember to detach the battery from your Holosun EPS Carry to prevent unintended activation during the process.
To perform a factory reset on your Holosun EPS Carry, follow these straightforward steps:
- Simultaneously press and hold the power button for approximately 7 seconds.
- An indicator will flash, indicating that the reset is being performed.
- Stop pressing the power button once the reset is complete.
Your Holosun EPS Carry should now be back to its factory settings. You can insert the battery and verify your sight's functionality. If you encounter any further problems, don't hesitate to seek help from Holosun's support.
Restore Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide
Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Follow these steps carefully to ensure a successful factory reset.
- Initially, Activate your Holosun EPS Carry by pressing the power button.
- After that, press and hold both the mode button and the up/down adjustment button simultaneously.
- While continue holding these buttons, press the power button once.
- The display will show a confirmation prompt indicating that the reset process is initiated.
- Permit the process to complete. This may take a few moments. Once done, your Holosun EPS Carry will automatically shutdown.
After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.
Clear All Settings on Your Holosun EPS Carry
To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Holding a specific button combination. Consult your Guidebook for the exact button sequence for your model. Once in the settings menu, look for an option that says "Reset All". Select this option and confirm the reset. Your sight will then power off and restart with all settings Reinitialized to their default values.
Reinitialize your Holosun EPS Carry through a Factory Standard Settings
If your Holosun EPS Carry is acting funny, a factory reset might be the answer. This will return your sight to its initial settings, clearing any personalized configurations you've made. To perform this reset, adhere to these straightforward steps:
- Initially, locate the reset lever on your EPS Carry.
- Then, engage a thin object, like a pen tip, to push the reset lever.
- During hold the reset switch engaged, power on your EPS Carry.
- You'll display a message indicating that the reset is successful.
Once the reset is complete, your EPS Carry will be click here returned to its factory settings.